employing a circular dish often having a small pocket at the bottom. The prospector fills the dish with gold-bearing sand or gravel, holds it within a gentle stream of water, and swirls it. The lighter areas of the gravel are gradually washed off as well as the gold particles are still nearby the center with the pan or even in the pocket.To separate the gold in the gold ore collected in the mine tunnel, the ore was crushed with a series of gold ore crushers, for example primary jaw crusher found in preparing samples for assaying.
The first step of separate the gold from gold ore is crushing, then gold ore is crushed to be able to increase the surface area of the gold ore for greater gold recovery. Gold mining process equipment is loaded in to the primary crusher for initial sizing. The jaw crusher can break the gold ore rocks into 150mm or 6 inch, then belt conveyor will transport the crushed gold ore screening plant, which runs the gold ore through vibrating screens to size the fabric. Oversized rock is sent via conveyor to the secondary crushers. Secondary crushing includes impact crusher and cone crusher. inch diameter or smaller, lime is added to the ore to boost the effectiveness of the method solution by raising the PH. The gold ore is then conveyed for the load out bin. Trucks drive beneath the load out bin being filled with crushed ore for delivery towards the leach facility.